ECE 22.06 Helmet Supplier: How to Verify Type Approval and CoP
Evaluating an ECE 22.06 helmet supplier? Learn how to check model-specific approval documents and production consistency evidence, and change control.

When buyers search for an “ECE 22.06 certified helmet manufacturer,” a certificate PDF is often the first document they request. It is useful evidence, but it should not be reviewed in isolation. A certificate on its own shows that an approval was granted; it does not by itself show that the helmet in the quotation is the approved type, or that later production still matches the approved type. That is why the certificate is a starting point for verification, not the whole check. Importers also need to confirm that the approval relates to the exact helmet type and configuration being offered, and that the manufacturer has arrangements for keeping production consistent with the approved type. Those are two separate confirmations, and a supplier check that covers only the first one leaves the other unanswered.
This guide explains the difference between type approval and Conformity of Production (CoP), then gives overseas distributors and brands a practical supplier-verification checklist. The checklist works through the two confirmations in order: first the approval itself, then the arrangements that keep production in conformity with it.
The cover image is an AI-generated procurement illustration. It does not depict or certify a specific product.
What UN Regulation No. 22 covers
UN Regulation No. 22 ( https://unece.org/transport/documents/2021/08/standards/un-regulation-no-22-rev5-06-series ) concerns protective helmets and their visors for drivers and passengers of motorcycles and mopeds. The regulation covers the helmet and the visor together, so a buyer checking a helmet should also keep the visor in view: the visor is part of the scope the regulation concerns, not a separate item to be assumed. The 06 series introduced additional requirements, including oblique-impact testing.
Requirements for a specific destination market can depend on local adoption and enforcement. Adoption and enforcement can differ from one destination market to another, so meeting the regulation is not the same as meeting every destination market’s requirements. Buyers should therefore confirm market requirements with the relevant authority or a qualified compliance adviser before ordering. The confirmation belongs before ordering, and it belongs with the relevant authority or a qualified compliance adviser — the parties who can speak for the destination market — rather than with the supplier alone.
Type approval and CoP answer different questions
Type approval and CoP are related, but they are not interchangeable. The two answer different questions, and a buyer who treats them as one check can miss the gap between them.
• Type approval concerns whether a defined helmet type or configuration has been approved against the applicable regulation. • Conformity of Production concerns the arrangements and checks intended to keep later production in conformity with the approved type. Type approval looks at a defined type or configuration and whether it has been approved; CoP looks at what happens after approval, in later production, and at the arrangements and checks intended to keep that production in conformity with the approved type.
UNECE explains that, before type approval is granted, the approval authority assesses the manufacturer’s production arrangements. The assessment happens before approval is granted, not after: the authority looks at the production arrangements first, and approval follows from that assessment. The authority also checks documented control plans and whether specified tests or checks are performed at the required intervals. The check covers the documented control plans and the specified tests or checks, and whether they are performed at the required intervals — the plan on paper and the checks in practice, at the intervals the arrangements require. The exact evidence and frequency depend on the regulation and the approved arrangements; buyers should not assume one universal testing schedule for every factory or model. Evidence and frequency are set by the regulation and by the approved arrangements for that factory and model, so a schedule that applies to one factory or model cannot be assumed to apply to another.
In procurement terms, an approval document helps answer “which type was approved?” CoP evidence helps buyers ask “how is continuing production controlled?” The first question is answered by the approval document; the other is a question to put to the supplier, and it is answered by CoP evidence — by the arrangements and checks the supplier can show for continuing production.
Use a three-way match before placing an order
A useful verification step is to compare three sets of information:
- Approval documents — the approval holder, approval number, helmet type or model reference, scope and relevant attachments.
- Your purchase specification — shell material, size range, visor or accessory configuration, colour requirements and any approved sample references.
- Product markings and samples — markings and physical details that can be checked against the documents and agreed specification.
The three sets each carry part of the picture. The approval documents carry the holder, the approval number, the helmet type or model reference, the scope and the relevant attachments — the formal record of what was approved and for whom. The purchase specification carries the commercial record of what is being ordered: the shell material, the size range, the visor or accessory configuration, the colour requirements and any approved sample references. The product markings and samples carry the physical record: the markings and physical details that can be checked against the documents and the agreed specification. The check is to compare the three and confirm that they refer to the same product configuration.
If these records do not clearly refer to the same product configuration, ask the supplier for clarification. A mismatch between the records is a question to be clarified with the supplier before placing an order, not a detail to be settled after production. Do not automatically apply one model’s approval status to another model, shell material, visor or accessory. Approval status belongs to the model, shell material, visor or accessory it was granted for; it does not move automatically to another model, another shell material, another visor or another accessory.
For visor-specific questions, see our buyer’s guide to checking ECE 22.06 helmet and visor suppliers ( https://www.taotaotrading.com/posts/ece-22-06-helmet-visor-supplier-guide ).
Five checks for an ECE 22.06 helmet supplier
- Confirm the approval holder and exact model scope
Ask for the complete approval document set available for the offered model, including attachments or information sheets where applicable. The complete set is the request: the approval documents plus the attachments or information sheets where applicable, for the offered model. Check whether the company offering the helmet is the approval holder, the manufacturer named in the documents or another party in the supply chain. The company offering the helmet is not always the approval holder, and it is not always the manufacturer named in the documents; it can also be another party in the supply chain. The check is to establish which of the three it is, so the buyer knows whose approval and whose manufacturing the documents describe.
- Match the offered configuration
Confirm the shell material, model reference, sizes and relevant visor or accessory options. The confirmation covers the shell material, the model reference, the sizes and the relevant visor or accessory options — the items that define the offered configuration. A similar appearance or shared marketing name is not enough to establish that two configurations have the same approval scope. Two helmets can share a similar appearance or a shared marketing name while differing in the items that define the configuration; appearance and marketing name do not establish the same approval scope.
- Ask for relevant production-consistency evidence
Ask how the supplier controls continuing conformity for the offered model. The question is about the offered model: how the supplier controls continuing conformity for that model, in later production. Depending on the approved arrangements, relevant evidence may include documented control plans, inspection records or test records. The evidence depends on the approved arrangements; documented control plans, inspection records or test records are the kinds of evidence that may be relevant. Request evidence that can be connected to the model and production period under discussion, while respecting legitimate confidentiality limits. The evidence should be connected to the model and the production period under discussion — evidence that cannot be connected to the model and period does not answer the question — and the request should respect legitimate confidentiality limits.
- Review change control
Ask how changes to materials, suppliers, tooling, construction or approved accessories are reviewed and communicated. Changes can touch materials, suppliers, tooling, construction or approved accessories, and the buyer needs to know how each kind of change is reviewed and how it is communicated. Material changes should not be treated as automatically covered by an existing approval. A change in materials is not automatically covered by an existing approval, and the same caution applies to the other changes the check lists: a change should be reviewed before it is treated as covered. Put agreed notification and approval requirements into the purchase specification or contract. The safeguard is written: agreed notification and approval requirements go into the purchase specification or contract, so the supplier’s duty to notify and the buyer’s approval step are agreed before ordering.
- Define the shipment document pack
Before production, agree which documents the supplier will provide and when. The agreement is made before production, and it covers which documents the supplier will provide and when they will be provided. Examples may include the applicable approval documents, model-specific specification, agreed sample or colour reference, inspection records and any production documents relevant to the order. The pack is order-specific: the applicable approval documents, the model-specific specification, the agreed sample or colour reference, inspection records and any production documents relevant to the order.
Warning signs that need follow-up
• The supplier sends a certificate but cannot link it to the offered model or configuration. A certificate that cannot be linked to the offered model or configuration leaves the first confirmation unanswered; ask the supplier for the link — the model reference and scope that connect the certificate to the helmet being offered. • Model references in the quotation, specification and approval documents do not match. When the model references in the quotation, the specification and the approval documents do not match, the three-way match has failed; ask for clarification before placing an order. • The supplier states that one document covers “all models” without showing the scope. A claim that one document covers “all models” needs the scope to be shown; ask the supplier to show the scope that supports the claim. • Changes to shell material, construction, visor or accessories are not explained. When changes to shell material, construction, visor or accessories are not explained, ask how the change was reviewed and whether the approval still covers the changed configuration. • Answers about production controls remain vague and cannot be connected to the order. Vague answers about production controls that cannot be connected to the order leave the CoP question unanswered; ask for evidence connected to the model and production period under discussion. • Marketing claims are presented as certification evidence. Marketing claims are not certification evidence; ask for the approval documents behind the claim.
These points do not automatically prove non-compliance, but they justify further questions before paying for samples, tooling or production. The warning signs are not proof of non-compliance; they are a reason to ask further questions, and the questions come before paying for samples, tooling or production — before money is committed, not after.
How Taotao Trading supports helmet sourcing
Taotao Trading helps overseas buyers compare supplier documents, organise model-specific questions, coordinate samples and follow up with selected factories in South China. The support covers comparing supplier documents, organising model-specific questions, coordinating samples and following up with selected factories in South China. We can also help buyers compare helmet and visor options from our product catalogue ( https://www.taotaotrading.com/products ).
Our work supports purchasing due diligence; it does not replace decisions made by the approval holder, the relevant authority, a testing body or the buyer’s destination-market compliance adviser. The boundary is clear: our work supports purchasing due diligence, and the decisions remain with the approval holder, the relevant authority, a testing body or the buyer’s destination-market compliance adviser. Available documents and supplier capabilities must be confirmed for each model and order. Confirmation is per model and per order: what is available and what a supplier can provide must be confirmed for each model and each order, not assumed from one model or order to the next.
Request a helmet sourcing review
Tell us your target market, interested model, estimated quantity and required approval. The starting point is the target market, the interested model, the estimated quantity and the required approval. We will help organise the supplier questions and request the available model-specific documents, sample options and OEM/ODM information. From that starting point we help organise the supplier questions and request the available model-specific documents, the sample options and the OEM/ODM information.
Contact Taotao Trading to discuss your helmet sourcing requirements ( https://www.taotaotrading.com/contact ).
Official references
• UNECE — UN Regulation No. 22, Revision 5, 06 series ( https://unece.org/transport/documents/2021/08/standards/un-regulation-no-22-rev5-06-series ) • UNECE — Frequently Asked Questions on vehicle regulations and type approval ( https://unece.org/transport/vehicle-regulations/faq ) • UNECE — Overview of the UN helmet standard and Conformity of Production ( https://unece.org/sustainable-development/press/unece-and-un-road-safety-envoy-call-global-use-un-helmet-standard )
This article provides general procurement information and is not legal or certification advice.